六．物控
保質期shelf life
ABC分類法ABC Classification
反常需求Abnormal Demand
措施信息Action Message
活動報告標志Action-report-flag
基于活動的成本核算Activity-based Costing (ABC)
實際能力Actual Capacity
實際成本Actual Costs
調整現有庫存量Adjust-on-hand
已分配量Allocation {TodayHot}
替代工序Alternative Routine
裝配訂單Assembly Order
裝配零件表Assembly Parts List
裝配Assembly
計劃自動重排Automatic Rescheduling
可達到庫存Available Inventory
可用材料Available Material
達到庫存Available Stock
可利用工時Available Work
可簽約量Available-to-promise
平均庫存Average Inventory
欠交訂單Back Order
倒序計劃Back Scheduling
倒沖法Back flush {HotTag}
未完成訂單Backlog
現有庫存余額Balance-on-hand Inventory
批號Batch Number
批量生產Batch Production
標桿瞄準Benchmarking
工時清單Bill of Labor
提貨單Bill of Lading
物料清單Bill of Material
分庫Branch Warehouse
經營規劃Business Plan
采購員Buyer
能力管理Capacity Management
能力需求計劃Capacity Requirements Planning (CRP)
保管費率Carrying Cost Rate
保管費Carrying Cost
單元式制造Cellular Manufacturing
修改批量日期Change Lot Date
修改工序Change Route
修改產品結構Change Structure
檢查點Check Point
閉環物料需求計劃Closed Loop MRP
通用工序標識Common Route ID
計算機集成制造Computer-integrated Manufacturing (CIM)
配置代碼Configuration Code
約束管理/約束理論Constraints Management/Theory of Constraints (TOC)
依成本的材料清單Costed Bill of Material
急需零件Critical Part
累計提前期Cumulative Lead Time
現有運轉時間Current Run Hour
現有運轉數量Current Run Quantity
周期盤點Cycle Counting
調整日期Date Adjust
有效日期Date Available
修改日期Date Changed
結束日期Date Closed
截止日期Date Due
生產日期Date in Produced
庫存調整日期Date Inventory Adjust
作廢日期D ate Obsolete
收到日期Date Received
交付日期Date Released
需求日期Date Required
發貨日期Date to Pull
空負荷Dead Load
需求管理Demand Management
需求Demand
實際能力Demonstrated Capacity
非獨立需求Dependent Demand
直接增減庫存處理法Direct-deduct Inventory Transaction Processing
發料單Disbursement List
派工單Dispatch List
分銷資源計劃Distribution Resource Planning (DRP)
鼓－緩沖－繩子Drum-buffer-rope
經濟訂貨批量Economic Order Quantity (EOQ)
工程變更生效日期Engineering Change Effect Date
工程變更生效單Engineering Change Effect Work Order
工程停止日期Engineering Stop Date
例外控制Exception Control
呆滯材料分析Excess Material Analysis
急送代碼Expedite Code
加工訂單Fabrication Order
補足欠交Fill Backorder
總裝提前期Final Assembly Lead Time
確認的計劃訂單Firm Planned Order
固定訂貨批量F ixed Order Quantity
集中預測Focus Forecasting
完全跟蹤Full Pegging
通用生產管理原則Generally Accepted Manufacturing Practices
毛需求Gross Requirements
在制品庫存In Process Inventory
獨立需求Independent Demand
投入/產出控制Input/ Output Control
檢驗標識Inspection ID
廠際需求Interplant Demand
庫存周轉率Inventory Carry Rate
倉庫庫位類型Inventory Location Type
庫存周轉次數Inventory Turnover
發送訂單Issue Order
項目記錄Item Record
物料項目Item
加工車間Job Shop
準時制生產Just-in-time (JIT)
看板Kanban
人工工時Labor Hour
最后運輸日期Last Shipment Date
提前期Lead Time
層Level
負荷量Load Leveling
負荷報告Load Report
負荷Load
倉位代碼Location Code
倉位備注Location Remarks
倉位狀況Location Status
按需訂貨Lot for Lot
批量標識Lot ID
批量編號Lot Number
批量Lot Size
低位碼Low Level Code
機器能力Machine Capacity
機器加載Machine Loading
外購或自制決策Make or Buy Decision
面向訂單生產的產品Make-to-order Product
面向庫存生產的產品Make-to-stock Product
制造周期時間Manufacturing Cycle Time
制造資源計劃Manufacturing Resource Planning (MRP II)
主生產計劃Master Production Schedule (MPS)
物料成本Material Cost
物料發送和接收Material Issues and Receipts
物料需求計劃Material Requirements Planning (MRP)
登陸標志MPS Book Flag MPS
多重倉位Multiple Location
凈改變式MRP N et Change MRP
凈需求Net Requirements
新倉位New Location
新組件New Parent
新倉庫New Warehouse
不活動報告No Action Report
現有庫存量On-hand Balance
未結訂單Open Order
訂單輸入Order Entry
訂貨點Order Point
訂貨方針Order Policy
訂貨承諾Order Promising
訂貨備注Order Remarks
雙親Parent
零件清單Part Bills
零件批次Part Lot
零件編號Part Number
零件Part
反查Pegging
領料單Picking List
領料/提貨Picking
計劃訂單Planned Order
后減庫存處理法Post-deduct Inventory Transaction Processing
前減庫存處理法Pre-deduct Inventory Transaction Processing
發票價格Price Invoice
采購訂單價格Price Purchase Order
優先計劃Priority Planning
產品控制Product Control
產品線Production Line
生產規劃編制Production Planning
產品率Production Rate
產品結構樹Production Tree
預計可用庫存Projected Available Balance
采購訂單跟蹤Purchase Order Tracking
已分配量Quantity Allocation
倉位數量Quantity At Location
欠交數量Quantity Backorder
完成數量Quantity Completion
需求量Quantity Demand
毛需求量Quantity Gross
進貨數量Quantity In
排隊時間Queue Time
隊列Queue
重生成式MRP Regenerated MRP
重排假設Rescheduling Assumption
資源需求計劃Resource Requirements Planning
粗能力計劃Rough-cut Capacity Planning
工藝路線Routing
安全庫存量Safety Stock
保險期Safety Time
預計入庫量Scheduled Receipt
殘料率Scrap Factor
發送零件Send Part
維修件Service Parts
發貨地址Ship Address
發貨單聯系人Ship Contact
發貨零件Ship Date
發貨單Ship Order
工廠日歷Shop Calendar
車間作業管理Shop Floor Control
損耗系數Shrinkage Factor
標準產品成本Standard Product Cost
標準機器設置工時Standard Set Up Hour
標準單位運轉工時Standard Unit Run Hour
標準工資率Standard Wage Rate
狀況代碼Status Code
庫存控制Stores Control
建議工作單Suggested Work Order
約束理論Theory of Constraints (TOC)
時間段Time Bucket
時界Time Fence
單位成本Unit Cost
采購計劃員Vendor Scheduler
采購計劃法Vendor Scheduling
工作中心能力Work Center Capacity
工作中心Work Center
在制品Work in Process
工作令跟蹤Work Order Tracking
工作令Work Order
工作進度安排Work Scheduling
零庫存Zero Inventories
經濟訂貨批量＝Squat(2*年訂貨量*平均一次訂貨準備所發生成本/每件存貨的年儲存成本)
美國生產和庫存控制協會APICS，American Production & Inventory Control Society